Speak to an Account Manager
+1 (800) 763-7503
Related Categories — PCB Design » PCB Materials » Signal Integrity
How to Control your Controlled Impedance
While manufacturing a PCB, controlled impedance can be achieved through specific dielectric thickness and by providing the target ohms on each layer. The factors that influence impedance are the PCB materials’ dielectric, the trace thickness, width, and height from the ground plane.
Controlled Impedance
What is Back Drilling in PCB Design and Manufacturing?
There are various challenges when it comes to PCB design and manufacture and one of them is retaining ... more »
PCB Design
PCB Drilling Explained: The Dos and the Don’ts
Drilling is the most expensive and time-consuming process in PCB manufacturing. The PCB drilling process must be carefully ... more »
PCB Manufacturing
How to Control your Controlled Impedance
While manufacturing a PCB, controlled impedance can be achieved through specific dielectric thickness and by providing the target ... more »
Controlled Impedance
What is Back Drilling in PCB Design and Manufacturing?
There are various challenges when it comes to PCB design and manufacture and one of them is retaining ... more »
PCB Design
PCB Drilling Explained: The Dos and the Don’ts
Drilling is the most expensive and time-consuming process in PCB manufacturing. The PCB drilling process must be carefully ... more »
PCB Manufacturing
PCB Cross-Section Analysis: A Microscopic Visual Validation of PCBs
The cross-section or micro-section analysis is a destructive analysis that measures the quality of the manufactured board. It’s ... more »
PCB Assembly
Why Controlled Impedance Really Matters
Every day, PCB designs and components become smaller, faster – in other words, more complicated. It is now ... more »
Controlled Impedance
PCB Manufacturing Defects Caused By Land Patterns
PCB land pattern defects should be treated with due attention since their design is very essential for the ... more »
PCB Assembly
What is CAM or Computer-Aided Manufacturing?
Computer-Aided Manufacturing is the use of software and computer-controlled machinery to automate a manufacturing process.
PCB Manufacturing
How to Choose PCB Laminates and Materials for Fabrication
PCB material selection is the first step in your PCB design process. Selecting the right materials for your ... more »
PCB Design
How to Use Via-in-Pad for PCB Design and Manufacturing
Multi-layered printed circuit board design requires a means to establish connections between various layers. This is done using ... more »
PCB Manufacturing
Fabrication, Procurement, & Assembly. PCBs fully assembled in as fast as 5 days.
- Bundled together in an entirely-online process
- Reviewed and tested by Engineers
- DFA & DFM Checks on every order
- Shipped from Silicon Valley in as fast as 5 days
Fabrication. Procurement & Assembly optional. Flexible and transparent for advanced creators.
- Rigid PCBs, built to IPC-6012 Class 2 Specs
- 2 mil (0.002″) trace / space
- DFM Checks on every order
- 24-hour turn-times available
Complex technology, with a dedicated CAM Engineer. Stack-up assistance included.
- Complex PCB requirements
- Mil-Spec & Class 3 with HDI Features
- Blind & Buried Vias
- Flex & Rigid-Flex boards