After reviewing the differential impedance as well as the even or common mode, let’s now dive into the physical parameters of a differential pair.
This article is the first part of our Differential Pair series. It was written by Atar Mittal, the General Manager of our Design and Assembly Divisions.
This article covers in-depth the topic of losses in PCB transmission lines. We will talk about conductor loss, signal trace resistance, dielectric loss, loss tangent/dissipation factor of a dielectric, and total insertion loss.
We previously quickly discussed signal reflection in our PCB Transmission Line series. This is an in-depth article about this very important topic that PCB designers should master. The first thing to remember is that reflections in transmission lines occur due to impedance discontinuity.
Today, we are going to talk about signal integrity. As a PCB designer, it is important for you to know the effects of via stubs on signal attenuation and data transfer rates.
SIGN UP FOR NEW ARTICLES AND UPDATES