(800) 763.7503
NoTouch PCB, quickturn proto pcb, prototype fabrication, 2 - 6 layers

No Touch PCB

Our No Touch self-service ordering system enables you to specify two-layer, four-layer, and six-layer prototype PCBs entirely online for quickturn delivery at the minimum cost. Using No Touch, you can automatically verify your design, get a quote, and submit your order in one smooth transaction.



  • 2, 4, 6 layer low-cost, quickturn prototype PCB fabrication
  • Pre-defined specifications
  • Automatic file verification
    • Free instant DFM on your files
    • Find whether your design matches No Touch specs
    • See layer images as seen by our system to ensure proper registration, polarity etc
    • Get a Netlist compare report
  • No holds processing
  • Minimum finished hole size down to 8 mils
  • Trace /space down to 4 mils
  • Now allows 0.250" (250 mils) Non-Plated Holes
  • Both HASL and Lead-free HASL surface finishes available.
    (If you need your boards to be RoHS compliant, choose Lead-Free HASL finish)
  • Instant online quoting, ordering and tracking
Terms & Conditions And Product Specs
This order will be fabricated strictly to NoTouch Product specifications. Our turn time commitment on No Touch orders is made on a "best effort" basis. Please note that there may be (very rare) instances when we exceed our specified time in manufacturing the order. In such cases, we will refund all or part of your shipping charges on the next order. In case there are any delays on 2 day turns we will give you a refund of the premium we charge over the 4 day price.

No Touch Product Specs: See FAQ for full details and design tips.
  Design Specifications
  • No Minimum Quantity. We allow you to order just 1 board if that's what you need.
  • Minimum 4 mil trace and space (0.004") allowed (standard is 6 mil)
  • Generally, 2 day, 3 day, 4 day and 10 day turns
  • Green LPI Mask on both sides
  • 2-layers, 4-layers or 6-layers

  • White Legend on both sides. While our automated AFV program does NOT check for width of silkscreen/legend, we recommend that legend be at least 5 mils wide.
  • Lead-free FR4 Material only
  • We use digital legend printing that allows for finer resolution of the legend.
  • 0.062" (+/-.006) thickness
  • Individual Route, Straight edges and 90 degree corners expected. Rounded corners are also allowed. Board outline must NOT have more than 28 corners (for example, in a rectangular board, at most 6 notches allowed).
  • Plated holes expected (non-plated holes must not be on copper areas)
  • 1 Part Number per order
  • Maximum plated hole size 0.246 inches (246 mils)
  • Maximum Size: Maximum individual board area allowed is 100 Sq" and no side can exceed 15.9 inches. Minimum Size: No side can be less than 0.5 inches.
  • Maximum non-plated hole size 0.250 inches (250 mils)
  • No arrays, No step and repeats
  • We allow minimum Hole Sizes of 8 mils
  • No Slots
  • 5 mils minimum width of Annular Rings
  • No Internal Routing
  • Lead-free Hot Air Solder Level (HASL) Surface Finish only
  • No Gold Finishes
  • Standard Nominal Copper: 1 oz./sq. ft.
  • Standard Copper plating: 0.0013" to 0.002" (33 microns to 51 microns)
  • Plating on Hole Walls: 0.0008" to 0.0012" (20 microns to 30 microns)
  • NOTE
    In the No Touch process, our Auto File Verification program checks on some features like traces/spaces, annular ring sizes, minimum hole sizes, hole density etc to ensure these meets our No Touch specs. However, if you need a full 100% Design Rule Check and Electrical Test, you should use our Web PCB product online.

    Do not upload any Milspec, Class 3, Military/Defense or ITAR designs for No Touch AFV processing.

    When you are ready to place an order, please have a Credit Card number available.
    For more details about No Touch product, see our FAQ page.